NAVIGATION SYSTEM (for Navigation Receiver Type) > Display does not Dim when Light Control Switch is Turned ON |
| 1.CHECK IMAGE QUALITY SETTING |
![]() |
Display the "Display" screen.
Turn the light control switch to the tail or head position.
Check if "Day Mode" setting on the display adjustment screen is on.
| Result | Proceed to |
| "Day Mode" setting is on | A |
| "Day Mode" setting is off | B |
| *a | Example |
|
| ||||
| A | ||
| ||
| 2.CHECK VEHICLE SIGNAL (OPERATION CHECK) |
![]() |
Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check (Click here).
Check that the display changes between ON and OFF according to the light control switch operation.
| Light Control Switch | Display |
| Tail or head | ON |
| Off | OFF |
|
| ||||
| OK | ||
| ||