Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for DVD)

NAVIGATION SYSTEM (for DVD) > Current Position Display does not Appear

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Enter the map data information screen.



    E196303E02
  1. Check if a disc is inserted into the map disc slot.

    1. Check if the map data version is displayed.

      OK:
      The map data version is displayed.

Text in Illustration 
*A
for LHD
*B
for RHD
*1
Example


B
INSERT MAP DISC IN MAP DISC SLOT
A


2.CHECK MAP DISC


    I100152E12
  1. Check that a map disc is inserted and that it is not deformed or cracked.

    OK:
    No deformations or cracks on the map disc



NG
REPLACE MAP DISC
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)