Home › Engine / Hybrid System › 2ZR-FXE EMISSION CONTROL › CANISTER

CANISTER > INSPECTION

for Preparation Click here



1. INSPECT CHARCOAL CANISTER


    A211259E02
  1. Close port C, apply compressed air to port A and check that air flows out from port B.
    Text in Illustration 
    *1
    Port A
    *2
    Port B
    *3
    Port C
    *4
    Air
    If the result is not as specified, replace the charcoal canister.



    A211260E02
  1. Close port C, apply compressed air to port B and check that air flows out from port A.
    Text in Illustration 
    *1
    Port A
    *2
    Port B
    *3
    Port C
    *4
    Air
    If the result is not as specified, replace the charcoal canister.



    A211261E02
  1. Apply compressed air to port B and check that air flows out from port A and port C.
    Text in Illustration 
    *1
    Port A
    *2
    Port B
    *3
    Port C
    *4
    Air
    If the result is not as specified, replace the charcoal canister.



    A211262E02
  1. Close ports A and C, and apply compressed air to port B to check for leaks.
    Text in Illustration 
    *1
    Port A
    *2
    Port B
    *3
    Port C
    If the result is not as specified, replace the charcoal canister.