Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM

DTC    B2790    ID BOX EEPROM Malfunction

for Preparation Click here


DESCRIPTION

This DTC is stored when the ID code box (immobiliser code ECU) detects an internal malfunction.

DTC No.
DTC Detection Condition
Trouble Area
B2790
ID code box (immobiliser code ECU) detects internal malfunction
  1. ID code box (Immobiliser code ECU)
  2. Certification ECU (Smart key ECU assembly)

INSPECTION PROCEDURE

NOTICE:
  1. If the certification ECU (smart key ECU assembly) is replaced, register all the keys.
  2. If the ID code box (immobiliser code ECU) is replaced, register the ECU code and ECU communication ID.

1.REPLACE ID CODE BOX (IMMOBILISER CODE ECU)
  1. Replace the ID code box (immobiliser code ECU).


NEXT


2.ECU CODE REGISTRATION
  1. Register the ECU code.


NEXT


3.ECU COMMUNICATION ID REGISTRATION
  1. Register the ECU communication ID.


NEXT


4.CHECK DTC OUTPUT
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs (Click here).

    OK:
    DTC B2790 is not output.



NG
REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
OK

END (ID CODE BOX (IMMOBILISER CODE ECU) WAS DEFECTIVE)