Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM

DTC    B1497/97    BUS IC Communication Malfunction

for Preparation Click here


DESCRIPTION

The air conditioning harness connects the A/C amplifier and each servo. The A/C amplifier supplies power and sends operation instructions to each servo through the air conditioning harness. Each servo sends the damper position information to the A/C amplifier.

DTC No.
DTC Detection Condition
Trouble Area
B1497/97
Communication line error or open
  1. Air conditioning harness
  2. A/C amplifier

WIRING DIAGRAM


E178937E19


INSPECTION PROCEDURE

1.INSPECT A/C AMPLIFIER


    E107325E66
  1. Remove the A/C amplifier with the connectors still connected.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    z6-2 (BUS G) - Body ground
    Always
    Below 1 Ω

    Text in Illustration 
    *1
    Component with harness connected
    (A/C Amplifier)



NG
REPLACE A/C AMPLIFIER (Click here)
OK


2.INSPECT A/C AMPLIFIER


    E107325E67
  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    Condition
    Specified Condition
    z6-4 (B BUS) - z6-2 (BUS G)
    Power switch off
    Below 1 V
    z6-4 (B BUS) - z6-2 (BUS G)
    Power switch on (IG)
    11 to 14 V
    z6-3 (BUS) - z6-2 (BUS G)
    Power switch on (IG)
    Pulse generation

    Text in Illustration 
    *1
    Component with harness connected
    (A/C Amplifier)



NG
REPLACE A/C AMPLIFIER (Click here)
OK

REPLACE AIR CONDITIONING HARNESS (Click here)