DTC B1497/97 BUS IC Communication Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1497/97 | Communication line error or open |
|

| 1.INSPECT A/C AMPLIFIER |
![]() |
Remove the A/C amplifier with the connectors still connected.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| z6-2 (BUS G) - Body ground | Always | Below 1 Ω |
| *1 | Component with harness connected (A/C Amplifier) |
|
| ||||
| OK | |
| 2.INSPECT A/C AMPLIFIER |
![]() |
Measure the voltage according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| z6-4 (B BUS) - z6-2 (BUS G) | Power switch off | Below 1 V |
| z6-4 (B BUS) - z6-2 (BUS G) | Power switch on (IG) | 11 to 14 V |
| z6-3 (BUS) - z6-2 (BUS G) | Power switch on (IG) | Pulse generation |
| *1 | Component with harness connected (A/C Amplifier) |
|
| ||||
| OK | ||
| ||