REAR AIRBAG SENSOR > ON-VEHICLE INSPECTION |
| 1. INSPECT REAR AIRBAG SENSOR (for Vehicle not Involved in Collision) |
Perform a diagnostic system check (Click here).
| 2. INSPECT REAR AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag not Deployed) |
Perform a diagnostic system check (Click here).
Visually check the rear airbag sensors for defects if a quarter panel of the vehicle or the area around a quarter panel is damaged.
The defects are as follows:
| 3. INSPECT REAR AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag is Deployed) |
When airbags have deployed as the result of a collision, be sure to replace all rear airbag sensors in the damaged areas (anywhere in need of repair).
Visually check the rear airbag sensors in undamaged areas for defects.
The defects are as follows: