HV RELAY ASSEMBLY > REMOVAL |
| 1. REMOVE UPPER HYBRID BATTERY COVER SUB-ASSEMBLY |
| 2. DISCONNECT FRAME WIRE |
![]() |
Remove the 2 nuts, then disconnect the frame wire from the hybrid battery junction block assembly.
Disconnect the clamp and frame wire.
| 3. REMOVE HYBRID BATTERY JUNCTION BLOCK |
![]() |
Disconnect the 2 connectors from the hybrid battery junction block.
![]() |
Disconnect the 2 connectors from the hybrid battery junction block.
![]() |
Remove the 3 nuts and hybrid battery junction block.