POWER DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
| Display | Default | Content | Setting |
| Lighting Time | 15 s | Function that changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC) or (IG).) | 7.5 s, 15 s or 30 s |
| CUSTOMIZING FUNCTION WITH MULTI-DISPLAY |
Customizing function with multi-display (w/ Navigation System)
Turn the power switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle Customization / Light Settings
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
| Interior Lights Off Timer | 15 sec. | Function that changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC) or (IG).) | Off, 7.5 sec., 15 sec. or 30 sec. | Main body ECU (Multiplex network body ECU) |