Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM

CAN COMMUNICATION SYSTEM > FAIL-SAFE CHART

for Preparation Click here



FAIL-SAFE FUNCTION
  1. When communication fails in any of the CAN bus wires (communication wires), a fail-safe function(s) will operate. The fail-safe function that is specified for each system operates to prevent those systems from malfunctioning.

  2. The following table shows the effects on each system when communication is impossible. (For further details, see the pages for each system.)

    Function
    (Function Description)
    Control Master
    System Related
    Fail-safe Operation
    DTC
    (Driver Detectable)
    Power switch
    (Power source control)
    Power management control ECU
    1. Transmission control ECU
    2. Skid control ECU
    3. Main body ECU
    1. Power switch does not change to on (READY) even when power switch is pressed with the brake pedal depressed
    2. Power switch off is prohibited
    U0073
    U0129
    U0293
    (Warning and indicator lights come on)
    Hybrid driving control
    Power management control ECU
    ECM
    Only motor operation is used (Engine is not used)
    U0100
    (Warning and indicator lights come on)
    Shift position indicator display
    Transmission control ECU
    1. Transmission control ECU
    2. Main body ECU
    3. Combination meter
    Shift position indicator is not displayed
    U0146
    (Warning and indicator lights come on)
    Regenerative braking control
    Power management control ECU
    Skid control ECU
    Regenerative braking will stop
    (ABS/VSC control gradually stops)
    U0073
    U0129
    U0293
    (Warning and indicator lights come on)
    VSC control
    (Controls driving force while VSC operating)
    Skid control ECU
    1. Power management control ECU
    2. Yaw rate sensor
    3. Steering angle sensor
    ABS/VSC control is inoperative
    (ABS/VSC control gradually stops)
    U0073
    U0123
    U0124
    U0126
    U0293
    (Warning and indicator lights come on)
    ABS control
    (Controls driving force while ABS operating)
    Skid control ECU
    Yaw rate sensor
    ABS control is inoperative
    (ABS control gradually stops)
    U0073
    U0123
    U0124
    (Warning and indicator lights come on)
    TRC control
    (Engine power control by VSC/TRC)
    Skid control ECU
    1. Power management control ECU
    2. Yaw rate sensor
    3. Steering angle sensor
    ABS/VSC control is inoperative
    (ABS/VSC control gradually stops)
    U0073
    U0123
    U0124
    U0126
    U0293
    (Warning and indicator lights come on)
    Electric power steering control
    (Speed of vehicle induction type torque control)
    Power steering ECU
    1. Power management control ECU
    2. Skid control ECU
    Depression of EPS assist
    (Deterioration of steering assist)
    U0129
    U0293
    (Warning light comes on)
    Air conditioning control
    (Air conditioning control is in cabin)
    Air conditioning amplifier
    1. Power management control ECU
    2. ECM
    3. Combination meter
    4. Main body ECU
    Air conditioning function and PTC heater function stop
    U0100
    U0142
    U0155
    U0293
    (Air conditioning is inoperative)
    Entry function/Power door lock control
    1. Certification ECU
    2. Main Body ECU
    1. ECM
    2. Combination meter
    3. Power management control ECU
    Unlock permitted
    U0100
    U0142
    U0155
    U0293
    U0327
    (Wireless door lock cannot operate)
    Vehicle-to-vehicle distance control
    Driving support ECU
    1. Power management control ECU
    2. Skid control ECU
    3. ECM
    4. Steering angle sensor
    5. Yaw rate sensor
    Vehicle-to-vehicle distance control does not operate
    U0122
    U0123
    U0126
    U0293
    (Warning and indicator lights come on)
    Pre-crash safety system
    Driving support ECU
    1. Power management control ECU
    2. Skid control ECU
    3. ECM
    4. Steering angle sensor
    5. Yaw rate sensor
    6. Seat belt control ECU
    Pre-crash safety control is inoperative
    U0122
    U0123
    U0126
    U0293
    U1104
    U1100
    (Warning and indicator lights come on)
    Seat belt control ECU
    1. Skid control ECU
    2. Driving support ECU
    3. Center airbag sensor
    4. Main body ECU
    Pre-crash safety control is inoperative
    U0122
    U0140
    U0151
    U1104
    (Warning and indicator lights come on)
    Intelligent parking guidance system
    Parking assist ECU
    1. Power management control ECU
    2. EPS ECU
    3. Skid control ECU
    4. Steering angle sensor
    5. Main body ECU
    6. Air conditioning amplifier
    Intelligent parking assist is inoperative
    U0073
    U0126
    U0129
    U0131
    U0140
    U0293