Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM (for Entry Function)

ENTRY AND START SYSTEM (for Entry Function) > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

HINT:
The items in the table below can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current setting before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Customize Setting.

  5. Select the setting by referring to the table below.

    Entry & Start 
    Tester Display
    Default
    Content
    Setting
    Park Wait Time
    2.5 s
    Function that sets waiting time to permit opening door after door is locked with entry lock function
    0.5 s, 1.5 s, 2.5 s or 5 s
    Ignition Available Area
    All
    Function that switches the entry hybrid vehicle control system start detection area
    Front or All
    Back Door Opening Operation*
    Long
    Function that opens the back door when the driver has the key and presses back door opener switch assembly (opener switch)
    Long, Twice or OFF
    *: w/ Entry System Back Door Open Function

    Warning 
    Tester Display
    Default
    Content
    Setting
    Key Low Battery Warning
    ON
    Function that warns driver that the key battery is weak
    ON or OFF


CUSTOMIZING FUNCTION WITH MULTI-DISPLAY

HINT:
The items in the table below can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current setting before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the multi-display (for Radio and Display Type)

    1. Turn the power switch on (IG).

    2. Enter the following menus: SETUP / Vehicle.

    3. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Entry and Start System
      On
      Function that enables or disables the entry and start system.
      On or Off
      Certification ECU (smart key ECU assembly)

  2. Customizing with the multi-display (for Navigation Receiver Type)

    1. Turn the power switch on (IG).

    2. Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Settings.

    3. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Entry and Start System
      On
      Function that enables or disables the entry and start system.
      On or Off
      Certification ECU (smart key ECU assembly)


ELECTRICAL KEY CANCEL
The electrical key cancel operation disables the following functions:
  1. Entry Unlock/Lock
  2. Entry Hybrid Vehicle Control System Start
  3. Entry System Back Door Open Function*
    *: w/ Entry System Back Door Open Function
  4. Electrical Key Lock-in Prevention
  5. Warning
  1. The operation procedure is as follows:
    Precondition:
    Power switch off, driver door closed and unlocked.

    1. Push the unlock switch of the key once.

    2. Open the driver door within 5 seconds.

    3. Push the unlock switch of the key twice within 5 seconds.

    4. Close and open the driver door twice within 30 seconds.
      (Driver door: Close → Open → Close → Open)

    5. Push the unlock switch of the key twice within 5 seconds.

    6. Close and open the driver door within 30 seconds.
      (Driver door: Close → Open)

    7. Close the driver door within 5 seconds.
      When electrical key cancel is activated, the wireless door lock buzzer sounds twice.
      To return to the original condition, perform the procedure again. When the original condition is returned, the wireless door lock buzzer sounds once.