ENTRY AND START SYSTEM (for Start Function) > DTC CHECK / CLEAR |
| CHECK DTC |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Power Source Control or Telematics Transceiver* / Trouble Codes.
Read the DTC by following the prompts on the intelligent tester screen.
| CLEAR DTC |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Power Source Control or Telematics Transceiver* / Trouble Codes.
Clear the DTC by following the directions on the intelligent tester screen.