Home › Engine / Hybrid System › 2ZR-FXE COOLING › COOLING FAN MOTOR

COOLING FAN MOTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT COOLING FAN MOTOR


    A204448E01
  1. Check that the motor operates smoothly when the battery is connected to the cooling fan motor connector.
    Text in Illustration 
    *1
    Front view of wire harness connector
    (to Cooling Fan Motor)

  1. Clamp the 400 A probe of an ammeter over the M+ wire of the cooling fan motor.

  1. Measure the current while the motor is operating.

    Standard Current:
    Item
    Condition
    Specified Condition
    Cooling fan motor
    20°C (68°F)
    4.7 to 8.7 A at 12 V

    If the result is not as specified, replace the cooling fan motor.



2. INSPECT NO.2 COOLING FAN MOTOR


    A216473E01
  1. Check that the motor operates smoothly when the battery is connected to the No. 2 cooling fan motor connector.
    Text in Illustration 
    *1
    Front view of wire harness connector
    (to No. 2 Cooling Fan Motor)

  1. Clamp the 400 A probe of an ammeter over the M+ wire of the No. 2 cooling fan motor.

  1. Measure the current while the motor is operating.

    Standard Current:
    Item
    Condition
    Specified Condition
    No. 2 cooling fan motor
    20°C (68°F)
    4.7 to 8.7 A at 12 V

    If the result is not as specified, replace the No. 2 cooling fan motor.