Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM

THEFT DETERRENT SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here


HINT:
The following items can be customized.

NOTICE:
  1. After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
  2. Be sure to record the current settings before customization.
  3. When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization. (Example: For the system, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting.)


CUSTOMIZE
  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the tester on.

  4. Enter the following menus: Customize setting.

  5. Select the setting by referring to the table below.

    Theft Deterrent System 
    Display(Item)
    Default
    Content
    Setting
    Mech. Key Entry Alarm Cancel
    OFF
    Function that makes it possible to cancel the alarm with an unlock operation using the mechanical key.
    ON/OFF