Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for RH Side)

REAR SEAT INNER BELT ASSEMBLY (for RH Side) > INSPECTION

for Preparation Click here



1. INSPECT REAR SEAT INNER BELT ASSEMBLY (for RH Side)


B202371E05
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (RBR+) - 2 (E)
    Rear seat belt RH fastened
    Below 1 Ω
    1 (RBR+) - 2 (E)
    Rear seat belt RH not fastened
    10 kΩ or higher

    Text in Illustration 
    *1
    Component without harness connected
    (Rear Seat Inner Belt Assembly (for RH Side))
    If the result is not as specified, replace the rear seat inner belt assembly (for RH side).