Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY

FRONT SEAT INNER BELT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


B202371E03
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    R5-3 (+) - R5-2 (E)*1
    S22-3 (+) - S22-2 (E)*2
    Driver seat belt unfastened
    Below 1 Ω
    R5-3 (+) - R5-2 (E)*1
    S22-3 (+) - S22-2 (E)*2
    Driver seat belt fastened
    10 kΩ or higher

    1. *1: for LHD
    2. *2: for RHD
    Text in Illustration 
    *1
    Component without harness connected
    (Front Seat Inner Belt Assembly (for Driver Side))
    *2
    for LHD
    *3
    for RHD
    If the result is not as specified, replace the front seat inner belt assembly (for driver side).



2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


B202370E09
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    S22-3 (+) - B-1*1
    R5-3 (+) - B-1*2
    Always
    Below 1 Ω
    S22-2 (E) - B-3*1
    R5-2 (E) - B-3*2
    Front passenger seat belt unfastened
    Below 1 Ω
    S22-2 (E) - B-3*1
    R5-2 (E) - B-3*2
    Front passenger seat belt fastened
    10 kΩ or higher

    1. *1: for LHD
    2. *2: for RHD
    Text in Illustration 
    *1
    Component without harness connected
    (Front Seat Inner Belt Assembly (for Front Passenger Side))
    *2
    Component without harness connected
    (Occupant Detection Sensor (Separate Type Front Seat Cushion Pad))
    *3
    for LHD
    *4
    for RHD
    If the result is not as specified, replace the front seat inner belt assembly (for front passenger side).