Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > TERMINALS OF ECU

for Preparation Click here



COMBINATION METER ASSEMBLY

E188249E01

  1. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    L27-2 (TC O)*1 - Body ground
    G - Body ground
    Trip switch signal (Unit change switch)
    Unit change switch not pressed
    11 to 14 V
    Unit change switch pressed
    Below 1 V
    L27-2 (TC O)*2 - Body ground
    G - Body ground
    Trip switch signal (Tail cancel switch)
    Tail cancel switch not pressed
    11 to 14 V
    Tail cancel switch pressed
    Below 1 V
    L27-3 (TIRE)*3 - Body ground
    G - Body ground
    Tire pressure warning light signal
    Power switch on (IG), tire pressure warning light off
    3.2 V or higher
    Power switch on (IG), tire pressure warning light on
    0.9 to 3.2 V
    L27-5 (S) - Body ground
    R - Body ground
    Oil pressure switch signal
    Power switch on (IG), oil pressure warning display off
    Below 1 V
    Power switch on (IG), oil pressure warning display comes on
    11 to 14 V
    L27-6 (LVWG) - Body ground
    L - Body ground
    Headlight leveling indicator light signal
    Power switch on (IG), headlight leveling indicator light off
    11 to 14 V
    Power switch on (IG), headlight leveling indicator light blinks
    Below 1 V ←→ 11 to 14 V
    L27-7 (+S) - Body ground
    V - Body ground
    Speed signal for other systems (Output)
    Power switch on (IG), wheel being rotated
    Pulse generation
    (See waveform 1)
    L27-8 (SI) - Body ground
    V - Body ground
    Speed signal (Input)
    Power switch on (IG), wheel being rotated
    Pulse generation
    (See waveform 1)
    L27-9 (E2) - Body ground
    G - Body ground
    Ground (Water temperature sensor ground)
    Always
    Below 1 Ω
    L27-10 (CANH) - Body ground
    P - Body ground
    CAN communication signal
    Power switch off
    200 Ω or higher
    L27-11 (CANL) - Body ground
    W - Body ground
    CAN communication signal
    Power switch off
    200 Ω or higher
    L27-12 (HOUR) - Body ground
    B - Body ground
    Trip switch signal (Hour adjust switch)
    Hour adjust switch not pressed
    11 to 14 V
    Hour adjust switch pressed
    Below 1 V
    L27-13 (MIN) - Body ground
    B - Body ground
    Trip switch signal (Minute adjust switch)
    Minute adjust switch not pressed
    11 to 14 V
    Minute adjust switch pressed
    Below 1 V
    L27-14 (L) - Body ground
    B - Body ground
    Fuel level signal
    Power switch on (IG), fuel level warning light OFF
    Below 1 V
    Power switch on (IG), fuel level warning light ON
    3 to 7 V
    L27-15 (ES2) - Body ground
    W - Body ground
    Ground (Fuel ground)
    Always
    Below 1 Ω
    L27-16 (TWS3) - Body ground
    B - Body ground
    Water temperature sensor signal
    Power switch on (IG), engine coolant temperature below 113°C (235°F)
    0.2 to 4.8 V
    Power switch on (IG), engine coolant temperature below 120°C (248°F) or more
    Below 0.15 V
    L27-17 (RST) - Body ground
    R - Body ground
    Trip switch signal (Set switch)
    Set switch not pressed
    11 to 14 V
    Set switch pressed
    Below 1 V
    L27-18 (B) - Body ground
    R - Body ground
    Battery
    Power switch off
    11 to 14 V
    L27-19 (IG+) - Body ground
    L - Body ground
    Power switch signal
    Power switch off
    Below 1 V
    Power switch on (IG)
    11 to 14 V
    L27-20 (IG2) - Body ground
    G - Body ground
    Power switch signal
    Power switch off
    Below 1 V
    Power switch on (IG)
    11 to 14 V
    L27-21 (PBLT) - Body ground
    Y - Body ground
    Front passenger side seat belt warning light signal
    Power switch on (IG), front passenger side seat belt warning light off
    11 to 14 V
    Power switch on (IG), front passenger side seat belt warning light blinks
    Below 1 V ←→ 11 to 14 V
    L27-22 (LP) - Body ground
    B - Body ground
    Security indicator light signal
    Power switch on (IG), security indicator light off
    Below 2 V
    Security indicator light blinks
    Pulse generation
    L27-24 (SW) - Body ground
    P - Body ground
    Front passenger side seat belt buckle switch signal
    Power switch on (IG), sit on the front passenger seat, and front passenger side seat belt unfastened
    Below 1 V
    Power switch on (IG), sit on the front passenger seat, and front passenger side seat belt fastened
    11 to 14 V
    L27-25 (EFI) - Body ground
    LG - Body ground
    MIL (Check engine warning light) signal
    Power switch on (IG), MIL (Check engine warning light) off
    11 to 14 V
    Power switch on (IG), MIL (Check engine warning light) comes on
    Below 1 V
    L27-26 (B) - Body ground
    Y - Body ground
    Turn LH indicator light signal
    Power switch on (IG), turn LH indicator light off
    11 to 14 V
    Power switch on (IG), turn LH indicator light blinks
    Below 1 V ←→ 11 to 14 V
    L27-27 (B) - Body ground
    G - Body ground
    Turn RH indicator light signal
    Power switch on (IG), turn RH indicator light off
    11 to 14 V
    Power switch on (IG), turn RH indicator light blinks
    Below 1 V ←→ 11 to 14 V
    L27-29 (STRG) - Body ground
    G - Body ground
    Steering pad switch signal
    Always
    Pulse generation
    L27-30 (ES) - Body ground
    BR - Body ground
    Ground (Signal ground)
    Always
    Below 1 Ω
    L106-1 (12V) - Body ground
    B - Body ground
    Power switch signal
    Power switch off
    11 to 14 V
    L106-4 (GND) - Body ground
    W - Body ground
    Ground
    Always
    Below 1 Ω
    L106-5 (BKR) - Body ground
    P - Body ground
    Headup display illumination signal
    Power switch on (IG)
    Pulse generation
    L106-6 (LAT) - Body ground
    R - Body ground
    Headup display dot illumination timing signal
    Power switch on (IG)
    Pulse generation
    L106-7 (CLKH) - Body ground
    R - Body ground
    Clock signal
    Always
    Pulse generation
    L106-8 (CLKL) - Body ground
    G - Body ground
    Clock signal
    Always
    Pulse generation
    L106-9 (SIH) - Body ground
    G - Body ground
    Headup display dot signal
    Power switch on (IG)
    Pulse generation
    L106-10 (SIL) - Body ground
    R - Body ground
    Headup display dot signal
    Power switch on (IG)
    Pulse generation
    L106-11 (WE) - Body ground
    L - Body ground
    Headup display dot illumination signal
    Power switch on (IG), headup display illuminated
    Pulse generation
    L106-14 (STP1) - Body ground
    V - Body ground
    Stepper motor signal
    Power switch on (IG)
    Pulse generation
    L106-15 (STP2) - Body ground
    LG - Body ground
    Stepper motor signal
    Power switch on (IG)
    Pulse generation
    L106-16 (STP3) - Body ground
    B - Body ground
    Stepper motor signal
    Power switch on (IG)
    Pulse generation
    L106-17 (STP4) - Body ground
    W - Body ground
    Stepper motor signal
    Power switch on (IG)
    Pulse generation
    L107-1 (NVSW) - L107-2 (E)
    Y - BE
    Navigation system display select switch signal
    Turn the power switch on (IG), navigation system display select switch not pressed
    Below 1 V
    Turn the power switch on (IG), navigation system display select switch pressed
    11 to 14 V
    L107-2 (E) - Body ground
    BE - Body ground
    Ground
    Always
    Below 1 Ω
    L107-3 (HUDI) - Body ground
    W - Body ground
    Headup display indicator light signal
    Turn the power switch on (IG), headup display indicator light goes off
    Below 1 V
    Turn the power switch on (IG), headup display indicator light comes on
    11 to 14 V
    L107-4 (HUDD) - L107-2 (E)
    R - BE
    Headup display position down switch signal
    Turn the power switch on (IG), headup display position down switch not pressed
    Below 1 V
    Turn the power switch on (IG), headup display position down switch pressed
    11 to 14 V
    L107-7 (HUDU) - L107-2 (E)
    P - BE
    Headup display position up switch signal
    Turn the power switch on (IG), headup display position down switch not pressed
    Below 1 V
    Turn the power switch on (IG), headup display position down switch pressed
    11 to 14 V
    L107-8 (HUDO) - L107-2 (E)
    B - BE
    Headup display mode select switch signal
    Turn the power switch on (IG), headup display mode select switch not pressed
    Below 1 V
    Turn the power switch on (IG), headup display mode select switch pressed
    11 to 14 V
    L107-9 (IIND) - Body ground
    BE - Body ground
    Navigation system indicator light signal
    Turn the power switch on (IG), navigation system indicator light goes off
    Below 1 V
    Turn the power switch on (IG), navigation system indicator light comes on
    11 to 14 V

    1. *1: w/ Unit Change Switch
    2. *2: w/o Unit Change Switch
    3. *3: w/ Tire Pressure Warning System



  2. I043789E16
  3. Waveform 1 (Reference):
    Item
    Condition
    Tool setting
    5 V/DIV., 20 ms./DIV.
    Vehicle condition
    Power switch on (IG), wheel being rotated

    HINT:
    When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.


COMBINATION METER ASSEMBLY INNER CIRCUIT

E188171E04


E188172E05


E292832E01


Terminal No. (Symbol)
Wire Harness Side
L27
1
-
2 (TC O)
Trip Switch
3 (TIRE)
Tire Pressure Warning ECU and Receiver*3
4
-
5 (S)
Oil Pressure Switch
6 (LVWG)
Headlight Leveling ECU Assembly
7 (+S)
Each part that uses the speed signal
8 (SI)
Skid Control ECU
9 (E2)
Ground (Water Temperature Sensor Ground)
10 (CANH)
CAN Communication Line
11 (CANL)
CAN Communication Line
12 (HOUR)
Trip Switch
13 (MIN)
Trip Switch
14 (L)
Fuel Sender Gauge Assembly
15 (ES2)
Fuel Sender Gauge Assembly
16 (TWS3)
Water Temperature Sensor
17 (RST)
Trip Switch
18 (B)
ECU-B Fuse
19 (IG+)
GAUGE Fuse
20 (IG2)
MET Fuse
21 (PBLT)
Telltale Light Assembly
22 (LP)
Certification ECU (Smart Key ECU Assembly)
23
-
24 (SW)
Front Seat Inner Belt Assembly RH*1 or Front Seat Inner Belt Assembly LH*2
25 (EFI)
ECM
26 (B)
Turn Signal Flasher
27 (B)
Turn Signal Flasher
28
-
29 (STRG)
Steering Pad Switch Assembly
30 (ES)
Ground
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
  1. *1: for LHD
  2. *2: for RHD
  3. *3: w/ Tire Pressure Warning System

Terminal No. (Symbol)
Wire Harness Side
L106
1 (12V)
Headup Display
2
-
3
-
4 (GND)
Ground
5 (BKR)
Headup Display (Combination Meter Mirror ECU)
6 (LAT)
Headup Display (Combination Meter Mirror ECU)
7 (CLKH)
Headup Display (Combination Meter Mirror ECU)
8 (CLKL)
Headup Display (Combination Meter Mirror ECU)
9 (SIH)
Headup Display (Combination Meter Mirror ECU)
10 (SIL)
Headup Display (Combination Meter Mirror ECU)
11 (WE)
Headup Display (Combination Meter Mirror ECU)
12
-
13
-
14 (STP1)
Headup Display (Combination Meter Mirror ECU)
15 (STP2)
Headup Display (Combination Meter Mirror ECU)
16 (STP3)
Headup Display (Combination Meter Mirror ECU)
17 (STP4)
Headup Display (Combination Meter Mirror ECU)
18
-
19
-
20
-
21
-
22
-
23
-
24
-
L107
1 (NVSW)
Trip Switch
2 (E)
Trip Switch
3 (HUDI)
Trip Switch
4 (HUDD)
Trip Switch
5
-
6
-
7 (HUDU)
Trip Switch
8 (HUDO)
Trip Switch
9 (IIND)
Trip Switch
10
-
11
-
12
-
13
-
14
-
15
-
16
-