Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM

SEAT BELT WARNING SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
  1. Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to this system before inspecting the suspected areas below.


Seat Belt Warning System 
Symptom
Suspected Area
See page
Driver Side Seat Belt Warning Light does not Operate
Front seat inner belt assembly (driver side)
Click here
No. 3 meter circuit plate
-
No. 5 meter circuit plate
-
No. 2 meter circuit plate
-
Main body ECU (multiplex network body ECU)
-
Wire harness or connector
-
Front Passenger Side Seat Belt Warning Light Malfunction
Front seat inner belt assembly (front passenger side)
Click here
No. 3 meter circuit plate
-
Occupant detection sensor (separate type front seat cushion pad)
-
Passenger seat belt warning light assembly
-
Wire harness or connector
-
Rear Seat Belt Warning Light Malfunction*
CAN communication system
Click here
Lighting system
-
Rear seat inner belt assembly (LH side and center)
-
Rear seat inner belt assembly (RH side)
-
No. 3 meter circuit plate
-
Wire harness or connector
-
  1. *: w/ Rear Seat Belt Warning