SLIDING ROOF HOUSING > REASSEMBLY |
| 1. INSTALL SLIDING ROOF WEATHERSTRIP |
![]() |
Engage the 12 clips and install a new sliding roof weatherstrip.
| 2. INSTALL REAR SLIDING ROOF WEATHERSTRIP |
![]() |
Align the matchmarks on the new rear sliding roof weatherstrip and rear sliding roof rail assembly.
| *1 | Matchmark |
| 3. INSTALL FRONT MOON ROOF MOULDING |
![]() |
Install a new front moon roof moulding as shown in the illustration.
| Area | Measurement |
| a | 1.3 mm (0.00512 in.) or less |
| 4. INSTALL REMOVABLE ROOF WEATHERSTRIP |
![]() |
Install a new removable roof weatherstrip as shown in the illustration.
| Area | Measurement |
| a | 2.3 mm (0.0906 in.) or less |
| 5. INSTALL REAR MOON ROOF MOULDING |
![]() |
Install a new rear moon roof moulding as shown in the illustration.
| 6. INSTALL SLIDING ROOF GLASS SEAL |
![]() |
Install a new sliding roof glass seal as shown in the illustration.