Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM

ENGINE IMMOBILISER SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK FOR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Entry & Start / Trouble Codes.

  5. Check the details of the DTC(s) (Click here).


CHECK FOR POWER MANAGEMENT CONTROL ECU (HV CPU) DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / HV Control / Trouble Codes.

  5. Check the details of the DTC(s).
    (Click here for engine immobiliser system)
    (Click here for hybrid vehicle control system)


CHECK FOR TELEPHONE TRANSCEIVER ASSEMBLY DTC (W/ BLOCKING SYSTEM)
  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Telematics / Trouble Codes.

  5. Check the details of the DTCs (Click here).


CLEAR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Entry & Start / Trouble Codes.

  5. Clear the DTCs.


CLEAR POWER MANAGEMENT CONTROL ECU (HV CPU) DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / HV Control / Trouble Codes.

  5. Clear the DTCs.


CLEAR TELEPHONE TRANSCEIVER ASSEMBLY DTC (W/ BLOCKING SYSTEM)
  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Telematics / Trouble Codes.

  5. Clear the DTCs.