Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > INSTALLATION

for Preparation Click here



1. INSTALL BLOWER ASSEMBLY


  1. w/o PTC Heater:

    1. Engage the guide.

    2. Install the blower assembly with the 3 screws.



    3. Connect the connector.


      E189130



  1. w/ PTC Heater:

    1. Engage the guide.

    2. Install the blower assembly with the 3 screws.

    3. Connect the connector.

    4. Engage each clamps.



    5. Install the screw and connect the quick heater connector.


      E189131E01


      Text in Illustration 
      *1
      Quick Heater Connector
      -
      -



2. INSTALL AIR CONDITIONING UNIT ASSEMBLY

HINT:
Refer to the procedure for Install Air Conditioning Unit Assembly (Click here).