Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REMOVAL

for Preparation Click here



1. REMOVE AIR CONDITIONING UNIT ASSEMBLY

HINT:
Refer to the procedure for Remove Air Conditioning Unit Assembly (Click here).



2. REMOVE BLOWER ASSEMBLY


  1. w/o PTC Heater:

    1. Disconnect the connector.



    2. Disengage the 3 screws and guide, and remove the blower assembly.


      E189130



  1. w/ PTC Heater:

    1. Remove the screw and disconnect the quick heater connector.

    2. Disconnect the connector and disengage each clamp.



    3. Disengage the 3 screws and guide, and remove the blower assembly.


      E189131E01


      Text in Illustration 
      *1
      Quick Heater Connector
      -
      -