Home
›
Vehicle Interior
›
THEFT DETERRENT / KEYLESS ENTRY
›
ELECTRICAL KEY OSCILLATOR (for Front Floor)
ELECTRICAL KEY OSCILLATOR (for Front Floor) > INSTALLATION
for Preparation
Click here
1. INSTALL ELECTRICAL KEY OSCILLATOR
Engage the clamp and install the electrical key oscillator.
NOTICE:
Be careful when installing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.
Connect the connector.
2. INSTALL REAR CONSOLE BOX ASSEMBLY
HINT:
Refer to the procedure from Install Rear Console Box Assembly (
Click here
).