Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ELECTRICAL KEY OSCILLATOR (for Rear Floor)

ELECTRICAL KEY OSCILLATOR (for Rear Floor) > INSTALLATION

for Preparation Click here



1. INSTALL ELECTRICAL KEY OSCILLATOR


    B229288
  1. Engage the clamp and install the electrical key oscillator.

    NOTICE:
    Be careful when installing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.

  1. Connect the connector.



2. INSTALL REAR DECK FLOOR BOX
  1. Install the rear deck floor box.



3. INSTALL REAR NO. 2 FLOOR BOARD


    B227788E01
  1. Engage the 3 guides <A>.

  1. Engage the 2 guides <B> and install the rear No. 2 floor board as shown in the illustration.