ELECTRICAL KEY OSCILLATOR (for Rear Side) > INSTALLATION |
| 1. INSTALL ELECTRICAL KEY OSCILLATOR (ELECTRICAL KEY ANTENNA) |
![]() |
Install the electrical key oscillator (electrical key antenna) with the 2 nuts.
Connect the connector.
| 2. INSTALL REAR BUMPER ASSEMBLY |
![]() |
Engage the 4 claws and install the rear bumper assembly as shown in the illustration.
![]() |
Engage the 5 claws.
![]() |
Install the screw.
Engage the claw.
![]() |
Engage the 2 rear bumper upper stoppers and install the 2 screws.
![]() |
Install the 9 clips.
Install the nut.
| 3. BUMPER POSITION SETTING (w/ Intelligent Parking Assist System) |