ELECTRICAL KEY OSCILLATOR (for Center Floor) > REMOVAL |
| 1. REMOVE REAR SEAT CUSHION ASSEMBLY |
![]() |
Disengage the 2 front hooks of the seat cushion from the vehicle body as shown in the illustration.
| *1 | 100 mm (3.94 in.) or less |
| *2 | Hook |
| *3 | Guide |
Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
Repeat the above procedure for the other hook.
Disengage the 2 guides of the seat cushion from the seatback.
Remove the rear seat cushion assembly.
| 2. REMOVE ELECTRICAL KEY OSCILLATOR |
![]() |
Remove the 2 clips from the floor carpet.
![]() |
Remove the bolt.
Disconnect the connector and remove the electrical key oscillator.