DTC B1620/21 Side Airbag Sensor RH Circuit Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1620/21 |
|
|

| 1.CHECK SIDE AIRBAG SENSOR RH |
![]() |
Turn the power switch off.
Disconnect the cable from the negative (-) battery terminal.
Interchange the side airbag sensor LH with RH and connect the connectors to them.
Connect the cable to the negative (-) battery terminal.
Turn the power switch on (IG), and wait for at least 60 seconds.
Clear the DTCs stored in the memory (Click here).
Turn the power switch off.
Turn the power switch on (IG), and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTCs B1620/21 and B1625/22 are not output. | A |
| DTC B1625/22 is output. | B |
| DTC B1620/21 is output. | C |
| *1 | Side Airbag Sensor LH |
| *2 | Center Airbag Sensor Assembly |
|
| ||||
|
| ||||
| A | ||
| ||