WIPER SWITCH > REMOVAL |
| 1. REMOVE LOWER STEERING COLUMN COVER |
Release the tilt and telescopic lever, and fully extend and lower the steering column assembly.
Lock the tilt and telescopic lever.
![]() |
Push the right and left sides of the lower steering column cover to disengage the 4 claws.
![]() |
Insert fingers into the opening of the tilt lever of the lower steering column cover to disengage the claw.
![]() |
Turn the steering wheel assembly to the right.
| *1 | Protective Tape |
Using a screwdriver, disengage the claw as shown in the illustration.
![]() |
Turn the steering wheel assembly to the left.
| *1 | Protective Tape |
Using a screwdriver, disengage the claw as shown in the illustration.
![]() |
Remove the lower steering column cover as shown in the illustration.
| 2. REMOVE UPPER STEERING COLUMN COVER |
![]() |
Disengage the claw and 2 pins, and remove the upper steering column cover.
| 3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY |
Turn the steering wheel assembly to the right.
![]() |
Disconnect the 2 connectors.
Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.