Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER RUBBER

FRONT WIPER RUBBER > REPLACEMENT

for Preparation Click here



1. REMOVE FRONT WIPER BLADE


    E190096E01
  1. Remove the holder of the front wiper blade as shown in the illustration.
    Text in Illustration 
    *1
    Holder

  1. Remove the front wiper blade from the front wiper arm as shown in the illustration.

    NOTICE:
    Do not lower the front wiper arm with the front wiper blade removed. The arm tip may damage the windshield surface.



2. REMOVE WIPER RUBBER


    E190094
  1. Remove the wiper rubber with the wiper rubber backing plates from the front wiper blade.



    E168922E01
  1. Remove the 2 wiper rubber backing plates from the wiper rubber.



3. INSTALL WIPER RUBBER


    E168916E03
  1. Install the 2 wiper rubber backing plates to the wiper rubber.
    Text in Illustration 
    *1
    Wiper rubber Backing Plate

    NOTICE:
    1. Align the protrusions on the wiper rubber and the notches of the backing plates.
    2. Align the curved lines of the backing plates and the glass.



    E190095
  1. Install the wiper rubber to the front wiper blade with the top of the rubber (curved end) facing the axis of the wiper arm.

    NOTICE:
    Push the wiper rubber into the wiper blade strongly to engage them securely.



4. INSTALL FRONT WIPER BLADE


    E190093E01
  1. Install the front wiper blade as shown in the illustration.

  1. Install the holder of the front wiper blade as shown in the illustration.
    Text in Illustration 
    *1
    Holder