CHILD RESTRAINT SEAT ANCHOR BRACKET > INSTALLATION |
| 1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY |
![]() |
Install the child restraint seat anchor bracket subassembly with the 2 bolts.
| 2. INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side) |
Place the rear seatback assembly LH in the cabin.
![]() |
Install the rear seatback assembly LH with the 2 bolts.
![]() |
Engage the fastener.
| *1 | Fastener |
| 3. INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side) |
Place the rear seatback assembly RH in the cabin.
![]() |
Install the rear seatback assembly RH with the 2 bolts.
![]() |
Engage the fastener.
| *1 | Fastener |
| 4. CONNECT REAR CENTER SEAT BELT ASSEMBLY (for RH Side) |
![]() |
Connect the anchor part of the rear seat inner belt assembly.
| *1 | Protruding Part |
| 5. INSTALL REAR SEAT HEADREST ASSEMBLY LH (for LH Side) |
![]() |
Install the rear seat headrest assembly LH as shown in the illustration.
| 6. INSTALL REAR SEAT HEADREST ASSEMBLY RH (for RH Side) |
![]() |
Install the rear seat headrest assembly RH as shown in the illustration.
| 7. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for RH Side) |
![]() |
Install the rear seat center headrest assembly as shown in the illustration.
| 8. INSTALL REAR SEAT CUSHION ASSEMBLY |
![]() |
Engage the 2 guides of the seat cushion to the seatback.
| *1 | 100 mm (3.94 in.) or less |
| *2 | Guide |
| *3 | Hook |
Engage the 2 front hooks of the seat cushion to the vehicle body.