Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM

THEFT DETERRENT SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



DATA LIST

HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body Electrical / Main Body / Data List.

  5. According to the display on the intelligent tester, read the Data List.

    Main Body 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    RR Door Courtesy SW
    Rear right door courtesy switch/ON or OFF
    ON: Rear right door RH or LH open
    OFF: Rear right door RH and LH closed
    -
    RL Door Courtesy SW
    Rear left door courtesy switch/ON or OFF
    ON: Rear left door RH or LH open
    OFF: Rear left door RH and LH closed
    -
    Back Door Courtesy SW
    Back door courtesy switch/ON or OFF
    ON: Back door open
    OFF: Back door closed
    -
    FR Door Lock Pos
    Front right door lock position switch/ON or OFF
    ON: Front right door unlocked
    OFF: Front right door locked
    -
    FR Door Courtesy
    Front right door courtesy switch/ON or OFF
    ON: Front right door open
    OFF: Front right door closed
    -
    FL Door Lock Pos
    Front left door lock position switch/ON or OFF
    ON: Front left door unlocked
    OFF: Front left door locked
    -
    FL Door Courtesy
    Front left door courtesy switch/ON or OFF
    ON: Front left door open
    OFF: Front left door closed
    -
    Hood Courtesy SW
    Engine hood courtesy signal/ON or OFF
    ON: Engine hood open
    OFF: Engine hood closed
    -
    RR-Door Lock Pos SW
    Rear right door lock position switch/ON or OFF
    ON: Rear right door RH or LH unlocked
    OFF: Rear right door RH and LH locked
    -
    RL-Door Lock Pos SW
    Rear left door lock position switch/ON or OFF
    ON: Rear left door RH or LH unlocked
    OFF: Rear left door RH and LH locked
    -
    Intrusion Sens OFF SW*
    Intrusion sensor cancel switch/ON or OFF
    ON: Intrusion sensor cancel switch on
    OFF: Intrusion sensor cancel switch off
    -
    Intrusion Sensor*
    Status of the intrusion sensor Detection/ON or OFF
    ON: Intrusion sensor detected
    OFF: Intrusion sensor not detected
    -
    Intrusion Sen Conn*
    Intrusion sensor connecting/ON or OFF
    ON: Intrusion sensor connected
    OFF: Intrusion sensor not connected
    -
    Sealed Glas Brak Sen*
    Glass breakage sensor connecting/With or Without
    With: Glass breakage sensor connected
    Without: Glass breakage sensor not connected
    -

    1. *: w/ Intrusion Sensor


ACTIVE TEST

HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body Electrical / Main Body / Active Test.

  5. According to the display on the intelligent tester, perform the Active Test.

    Main Body 
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    Hazard
    Hazard warning lights
    ON / OFF
    -
    Security Indicator
    Security indicator
    ON / OFF
    -
    Security Horn2*1
    Theft warning siren
    ON / OFF
    -
    Vehicle Horn
    Vehicle horns
    ON / OFF
    -
    Security Horn*2
    Security horn
    ON / OFF
    -
    Power For Intrusion Sensor*1
    Intrusion sensor power supply
    ON / OFF
    -

    1. *1: w/ Intrusion Sensor
    2. *2: w/o Intrusion Sensor