Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › INTRUSION SENSOR

INTRUSION SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL THEFT WARNING RADAR SENSOR


    B229305
  1. Install the theft warning radar sensor with the 3 screws.

  1. Engage the clamp.

  1. Connect the connector.



2. INSTALL MAP LIGHT ASSEMBLY (w/o Sliding Roof)
  1. Connect the connector.



    E189674
  1. Engage the 2 guides and 4 clips, and install the map light assembly.



3. INSTALL MAP LIGHT ASSEMBLY (w/ Sliding Roof)
  1. Connect the connector.



    E189672
  1. Engage the 2 guides and 4 clips, and install the map light assembly.



4. INSTALL ROOF TOP MOULDING


    B227833
  1. Engage the 3 claws and 2 clips to install the roof top moulding.