HEADLIGHT ASSEMBLY > DISASSEMBLY |
| 1. REMOVE NO. 1 HEADLIGHT BULB |
![]() |
Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.
| 2. REMOVE NO. 2 HEADLIGHT BULB (for Halogen Headlight) |
![]() |
Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.
| 3. REMOVE CLEARANCE LIGHT BULB (for Halogen Headlight) |
![]() |
Turn the headlight cord with the clearance light bulb in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.
Remove the clearance light bulb from the headlight cord.
| 4. REMOVE HEADLIGHT CORD (for Halogen Headlight) |
![]() |
Disengage the 2 clamps and remove the headlight cord.
| 5. REMOVE HEADLIGHT LEVELING MOTOR (for Halogen Headlight) |
![]() |
Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.
| *1 | Aiming Screw |
Turn the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to disengage the pin.
![]() |
Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration to disengage the shaft.
| *1 | Aiming Screw |
Pull out the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to remove it.
| 6. REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING (for Halogen Headlight) |
Remove the headlight leveling motor base packing.
| 7. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY (for LED Headlight) |
![]() |
Remove the 4 screws and disconnect the headlight light control ECU sub-assembly.
![]() |
Disconnect the connector and remove the headlight light control ECU sub-assembly.
| 8. REMOVE HEADLIGHT GASKET (for LED Headlight) |
Remove the headlight gasket.
| 9. REMOVE COVER RING (for LED Headlight) |
![]() |
Turn the cover ring in the direction indicated by the arrow shown in the illustration, and remove it.