Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT DIMMER SWITCH

HEADLIGHT DIMMER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY


    E185071
  1. Using pliers, expand the clamp.



    E164969
  1. While holding the clamp expanded, install the headlight dimmer switch assembly as shown in the illustration.

  1. Engage the claw.



    E189649
  1. Install the headlight dimmer switch assembly with the clamp.

  1. Connect the connector.



2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    E189320
  1. Engage the claw and install the windshield wiper switch assembly as shown in the illustration.

  1. Connect the 2 connectors.



3. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

HINT:
Refer to the procedure from Install Spiral Cable with Sensor Sub-assembly (Click here).