ENGINE HOOD COURTESY SWITCH > INSPECTION |
| 1. INSPECT ENGINE HOOD COURTESY SWITCH |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Position | Specified Condition |
| A47-1 - A47-2 | Locked | Below 1 Ω |
| A47-1 - A47-2 | Unlocked | 10 kΩ or higher |
| *1 | Component without harness connected (Hood Lock Assembly (Engine Hood Courtesy Switch)) |
| *2 | Unlock |
| *3 | Lock |