PCV VALVE > INSTALLATION |
| 1. INSTALL VENTILATION VALVE SUB-ASSEMBLY |
![]() |
Apply adhesive to 2 or 3 threads of the ventilation valve sub-assembly.
| *1 | Adhesive 1324 |
![]() |
Using a ball joint lock nut wrench (22 mm), install the ventilation valve sub-assembly.
| *1 | Ball Joint Lock Nut Wrench (22 mm) |
![]() |
Install the ventilation hose to the ventilation valve sub-assembly.
| 2. INSTALL NO. 1 ENGINE UNDER COVER |
| 3. INSTALL AIR CLEANER CASE |
![]() |
Install the air cleaner case with the 3 bolts.
Install the hose to the 3 clamps.
Install the air cleaner filter element sub-assembly.
| 4. INSTALL INLET AIR CLEANER ASSEMBLY |
![]() |
Install the inlet air cleaner assembly with the 2 bolts.
| 5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY |
![]() |
Install the air cleaner cap sub-assembly with the 2 clamps.
Connect the air cleaner hose assembly and tighten the hose clamp.
![]() |
Connect the connector.
| 6. INSTALL NO. 2 CYLINDER HEAD COVER |
![]() |
Engage the 3 clips to install the cover.