PCV VALVE > REMOVAL |
| 1. REMOVE NO. 2 CYLINDER HEAD COVER |
![]() |
Remove the 3 clips and No. 2 cylinder head cover.
| 2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY |
![]() |
Disconnect the mass air flow meter connector.
![]() |
Release the 2 clamps.
Loosen the hose clamp and remove the air cleaner cap.
| 3. REMOVE INLET AIR CLEANER ASSEMBLY |
![]() |
Separate the hose from the hose clamp.
Separate the wire harness clamp from the inlet air cleaner assembly.
Remove the 3 bolts and inlet air cleaner assembly.
| 4. REMOVE AIR CLEANER CASE |
Remove the air cleaner filter element.
![]() |
Separate the hose from the 3 hose clamps.
Remove the 3 bolts and air cleaner case.
| 5. REMOVE NO. 1 ENGINE UNDER COVER |
| 6. REMOVE VENTILATION VALVE SUB-ASSEMBLY |
![]() |
Remove the ventilation hose from the ventilation valve sub-assembly.
![]() |
Using a ball joint lock nut wrench (22 mm), remove the ventilation valve sub-assembly.
| *1 | Ball Joint Lock Nut Wrench (22 mm) |