FRONT SEATBACK HEATER (for Power Seat) > REMOVAL |
| 1. REMOVE FRONT SEAT ASSEMBLY |
| 2. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD |
![]() |
remove the 2 hog rings.
![]() |
Remove the 3 hog rings.
![]() |
Pull out the lower part of 2 fasteners from the separate type front seatback cover as shown in the illustration.
![]() |
Open the 2 fasteners.
![]() |
Remove the 3 hog rings and disconnect the 2 fastening rubbers.
| *1 | Fastening Rubber |
![]() |
Disengage the 2 hooks.
![]() |
Turn back the separate type front seatback cover to remove the nut, and separate the bracket of the separate type front seatback cover.
![]() |
Disengage the 4 claws and remove the 2 front seat headrest supports.
Remove the separate type front seatback cover with pad from the separate type front seatback spring assembly.
| 3. REMOVE FRONT SEATBACK HEATER ASSEMBLY (SEPARATE TYPE FRONT SEATBACK COVER) |
![]() |
Remove the 5 hog rings.
![]() |
Remove the 2 hog rings and the front seatback heater assembly (separate type front seatback cover) from the separate type front seatback pad.