Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM

AIR CONDITIONING SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here


HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


Air Conditioner 
Display (Item)
Default
Content
Setting
Set Temperature Shift
Normal
Function to control with the shifted temperature against the displayed temperature.
+2 C, +1 C, Normal, -1 C or -2 C
Air Inlet Mode
Automatic
Function to shift from INLET mode to RECIRCULATION mode when the A/C is turned on.
Manual or Automatic
Foot/DEF Auto Mode
ON
Function to automatically turn the airflow from FOOT/DEF on when AUTO mode is on.
OFF or ON
Foot/DEF Automatic Blow Up Function
ON
Function to automatically increase the blower level when the defroster is on.
OFF or ON
Ambient Temperature Shift
Normal
Function to control the shifted ambient temperature in relation to the displayed ambient temperature.
+3 C, +2 C, +1 C, Normal, -1 C, -2 C or -3 C
ECO MODE Cancel
OFF
Function to cancel the ECO mode drive when item is on.
OFF or ON
Noise and Vibration Reduction
OFF
Function to change speed of the compressor when item is on.
OFF or ON
Start Pre A/C*1
Long1
Function to set the activation operation method for the remote air conditioning system using the key (electrical transmitter).
1 tim ON, 2 tim ON, Long1 or Long2
Stop Pre A/C*1
2 tim ON
Function to set the stop operation method for the remote air conditioning system using the key (electrical transmitter).
1 tim ON, 2 tim ON, Long1 or Long2
  1. *1: w/ Remote Air Conditioning System