Home › Vehicle Interior › LIGHTING (INT) › GLOVE BOX LIGHT

GLOVE BOX LIGHT > INSPECTION

for Preparation Click here



1. INSPECT GLOVE BOX LIGHT ASSEMBLY


    E151728E07
  1. Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.

  1. Check that the glove box light comes on.

    OK:
    Glove box light comes on.

    Text in Illustration 
    *1
    Component without harness connected
    (Glove Box Light Assembly)
    If the result is not as specified, replace the glove box light assembly.