Home › Vehicle Interior › LIGHTING (INT) › BACK DOOR COURTESY SWITCH

BACK DOOR COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT BACK DOOR COURTESY SWITCH (BACK DOOR LOCK ASSEMBLY)


    B228545E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Locked
    10 kΩ or higher
    Unlocked
    Below 1 Ω

    Text in Illustration 
    *1
    Component without harness connected
    (Back Door Lock Assembly)
    *2
    Lock
    *3
    Unlock
    If the result is not specified, replace the back door lock assembly.