Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › INTELLIGENT PARKING ASSIST SYSTEM

DTC    C1657    Hybrid Powertrain Control Module

for Preparation Click here


DESCRIPTION

This DTC is stored when the parking assist ECU receives a hybrid control system malfunction signal from the hybrid control system via CAN communication.

DTC No.
DTC Detection Condition
Trouble Area
C1657
Powertrain system malfunction
Hybrid control system

INSPECTION PROCEDURE

1.CHECK DTC OUTPUT
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    Result:
    Result
    Proceed to
    DTC C1657 is output
    A
    No DTC is output
    B

    HINT:
    1. The DTC is stored when a malfunction occurs in the hybrid control system.
    2. If troubleshooting and repair of a malfunction in the hybrid control system has been completed, DTC C1657 will not be output again when rechecking for DTCs.
    3. If DTC C1657 is output frequently, duplicate the problem symptoms and perform the inspection again, even though the DTC is not output when rechecking for DTCs (Click here).



B
USE SIMULATION METHOD TO CHECK (Click here)
A

GO TO HYBRID CONTROL SYSTEM (Click here)