WASHER NOZZLE (for Rear Side) > INSTALLATION |
| 1. INSTALL REAR WASHER NOZZLE |
![]() |
Connect the washer hose.
![]() |
Engage the 2 claws to install the rear washer nozzle.
| 2. INSTALL UPPER BACK DOOR TRIM PANEL ASSEMBLY |
![]() |
Engage the 4 clips and 4 claws to install the upper back door trim panel assembly.
| 3. INSPECT REAR WASHER NOZZLE |
With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

| Area | Measurement |
| A | 48.7 mm (1.92 in.) |
| 4. ADJUST REAR WASHER NOZZLE |
![]() |
Using a screwdriver, adjust the direction of the rear washer nozzle.