HYBRID VEHICLE TRANSAXLE > REMOVAL |
| 1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE |
| 2. REMOVE FRONT CROSS MEMBER SUB-ASSEMBLY |
![]() |
Remove the bolt and nut.
Remove the front engine mounting insulator from the front engine mounting bracket.
| 3. REMOVE FRONT ENGINE MOUNTING INSULATOR |
![]() |
Remove the 2 bolts and front engine mounting insulator.
| 4. REMOVE REAR ENGINE MOUNTING INSULATOR |
![]() |
Remove the through bolt, and separate the rear engine mounting insulator.
| 5. REMOVE RADIATOR PIPE |
![]() |
Separate the No. 3 radiator hose from the cylinder head.
Remove the 2 bolts and radiator pipe.
| 6. DISCONNECT WIRE HARNESS |
Remove the 2 bolts and disconnect the 6 connectors and 12 wire harness clamps.

| 7. REMOVE STARTER HOLE INSULATOR |
![]() |
Remove the 2 bolts and starter hole insulator.
| 8. REMOVE FLYWHEEL HOUSING SIDE COVER |
![]() |
Remove the flywheel housing side cover.
| 9. REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY |
Using wood blocks or equivalent, set an engine lifter to the hybrid vehicle transaxle assembly.
![]() |
Remove the 7 bolts and hybrid vehicle transaxle assembly.
| 10. REMOVE WIRE HARNESS CLAMP BRACKET |
![]() |
Remove the 2 bolts and 2 wire harness clamp brackets.
| 11. REMOVE MOTOR CABLE BRACKET |
![]() |
Remove the bolt and motor cable bracket.
| 12. REMOVE FRONT ENGINE MOUNTING BRACKET |
![]() |
Remove the 3 bolts and front engine mounting bracket.
| 13. REMOVE REAR ENGINE MOUNTING BRACKET |
![]() |
Remove the 4 bolts and rear engine mounting bracket.
| 14. REMOVE ENGINE MOUNTING BRACKET LH |
![]() |
Remove the 3 bolts and engine mounting bracket LH.