Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM

DTC    U0129    Lost Communication with Brake System Control Module

DTC    U0293    Lost Communication with HV ECU

DTC    U1105    Lost Communication with Parking Assist ECU

for Preparation Click here


DESCRIPTION

The power steering ECU assembly receives signals from the power management control ECU and the brake booster with master cylinder (skid control ECU) via the CAN communication system.

DTC No.
DTC Detection Condition
Trouble Area
U0129
Lost communication with brake system control module
  1. CAN communication system
  2. Brake booster with master cylinder (skid control ECU)
U0293
Lost communication with power management control ECU
  1. CAN communication system
  2. Power management control ECU
U1105
Lost communication with parking assist ECU
  1. CAN communication system
  2. Parking assist ECU

INSPECTION PROCEDURE

1.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC is not output.



NG
GO TO CAN COMMUNICATION SYSTEM (Click here)
OK

CHECK INTERMITTENT PROBLEMS