Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE AIR INLET CONTROL SERVO MOTOR SUB-ASSEMBLY


    E189134
  1. Remove the 2 screws and air inlet control servo motor sub-assembly.



2. REMOVE AIR FILTER CASE


    E189136
  1. Disengage the claw and guide, and remove the air filter case as shown in the illustration.



3. REMOVE CLEAN AIR FILTER


    E189138
  1. Remove the clean air filter as shown in the illustration.



4. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY (w/o Solar Ventilation System)


    E189144
  1. Remove the 3 screws and front blower motor sub-assembly.



5. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY (w/ Solar Ventilation System)


    E189145
  1. Remove the 3 screws and front blower motor sub-assembly.