Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REASSEMBLY

for Preparation Click here



1. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY (w/o Solar Ventilation System)


    E189144
  1. Install the front blower motor sub-assembly with the 3 screws.



2. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY (w/ Solar Ventilation System)


    E189145
  1. Install the front blower motor sub-assembly with the 3 screws.



3. INSTALL CLEAN AIR FILTER


    E189139
  1. Install the clean air filter as shown in the illustration.



4. INSTALL AIR FILTER CASE


    E189137
  1. Engage the guide and claw to install the air filter case as shown in the illustration.



5. INSTALL AIR INLET CONTROL SERVO MOTOR SUB-ASSEMBLY


    E189134
  1. Install the air inlet control servo motor sub-assembly with the 2 screws.