Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW MASTER SWITCH

POWER WINDOW MASTER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE ASSIST GRIP COVER


    B228659
  1. Using a moulding remover, disengage the 6 claws, 2 clips and 3 guides, and remove the assist grip cover.



2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    B228663
  1. Disengage the 7 claws and 3 guides.

  1. Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.



3. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    B229111
  1. Remove the 3 screws and the multiplex network master switch assembly.