INTAKE MANIFOLD > INSTALLATION |
| 1. INSTALL INTAKE MANIFOLD |
Install a new No. 1 intake manifold to head gasket to the intake manifold.
![]() |
Install the intake manifold with the 2 bolts and 2 nuts.
![]() |
Connect the fuel vapor feed hose and ventilation hose.
Install a new O-ring to the engine oil level dipstick guide sub-assembly.
Apply a light coat of engine oil to the O-ring.
![]() |
Install the engine oil level dipstick guide sub-assembly with the 2 bolts and connect the wire harness clamp.
Install the engine oil level dipstick.
![]() |
Connect the 2 wire harness clamps and 3 connectors.
| 2. INSTALL VACUUM SWITCHING VALVE ASSEMBLY |
![]() |
Install the vacuum switching valve assembly with the bolt.
![]() |
Connect the 2 fuel vapor feed hoses and connector to the vacuum switching valve assembly.
Connect the No. 1 vacuum switching valve connector.
| 3. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR |
![]() |
Install the manifold absolute pressure sensor with the bot.
Connect the connector.
| 4. INSTALL EGR PIPE ASSEMBLY |
![]() |
Install 2 new gaskets and EGR pipe assembly with the 4 bolts.
![]() |
Install the wire harness support with the bolt.
![]() |
Connect the 2 wire harness clamps.
| 5. INSTALL THROTTLE BODY ASSEMBLY |
Install the throttle body assembly (Click here).