Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL (for LHD)

BRAKE PEDAL (for LHD) > DISASSEMBLY

for Preparation Click here



1. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY


    C208061E01
  1. Remove the 2 nuts and brake pedal stroke sensor assembly.

    NOTICE:
    Do not drop the brake pedal stroke sensor assembly. If the brake pedal stroke sensor assembly has been dropped, replace the brake pedal stroke sensor assembly with a new one.



2. REMOVE BRAKE PEDAL SUB-ASSEMBLY


    C205692
  1. Remove the brake pedal shaft and nut to remove the brake pedal sub-assembly from the brake pedal support sub-assembly.



3. REMOVE BRAKE PEDAL SHAFT COLLAR
  1. Remove the brake pedal shaft collar from the brake pedal sub-assembly.



4. REMOVE BRAKE PEDAL BUSHING
  1. Remove the 2 brake pedal bushings from the brake pedal sub-assembly.



5. REMOVE BRAKE PEDAL PAD